您好,欢迎访问无锡市嘉隆设备科技有限公司官放网站!

全国咨询热线15861434319

当前位置: 首页 > 新闻动态 > 行业新闻 犁刀混合机工作后的残渣怎么解决?
来源:无锡嘉隆 时间:2018-10-08 点击量:
大家在使用犁刀混合机之后有没有给它做好保养工作呢?毕竟犁刀混合机在使用之后里面会残余一些物料,出于各方面的考虑,我们都需要把残渣清除出去。在清理的过程当中,我们可能会遇到一些难清理的地方,这个时候就需要用一些技巧了。 
首先第一步要做的是检查油脂添加管路中是否有气体喷吹装置。还有犁刀混合机喷油嘴是否被堵。滤油罐中筛网是否损坏。就要调整犁刀混合机喷嘴的角度,尽量不能让油喷到混合机两端的墙板和桨叶上。当然适当控制油脂的加热温度,以防油温过高喷到物料中产生油团。在工艺上增加犁刀混合机混合后成品检验筛,将混合后的油团打散去除。
犁刀混合机.jpg
英文版:
Have you done any maintenance work after using the Coulter mixer? After all, the plough mixer will leave some material in it after use, for various considerations, we need to remove the residue. In the process of cleaning up, we may encounter some difficult areas to clean up, this time it requires some skills.
The first step is to check whether there is a gas injection device in the oil adding pipeline. And whether the nozzle of the Coulter mixer is blocked. Is the screen mesh damaged in the oil filter? It is necessary to adjust the angle of the nozzle of the plough mixer and try not to allow oil to be injected into the wall panels and blades at both ends of the mixer. Of course, the heating temperature of the oil should be properly controlled to prevent the oil temperature from being too high and spray into the material to produce oil clusters. Add the plough cutter mixture to the finished product inspection screen and remove the mixture after mixing.
联系我们
咨询热线:15995250526

地址:江苏省无锡前洲工业园
销售一部:15861434319
销售座机:0510-83390359
联系人:屠经理
邮 箱:419309846@qq.com