您好,欢迎访问无锡市嘉隆设备科技有限公司官放网站!

全国咨询热线15861434319

当前位置: 首页 > 新闻动态 > 公司动态 简单来说下槽型混合机的使用说明
来源:无锡嘉隆 时间:2018-10-01 点击量:
槽型混合机的使用说明:
1、使用前应进行一次空运转试车,在试车前应检查机器全部联接件的紧固程度,减速机的润滑油量和电机设备的完整性,然后闭合电源总开关进行空运转试车。分别点动倒料、复位按钮,检查工作情况是否良好,符合上述要求后进行加工(倒料按钮与复位按钮不能同时进行使用)。
2、加料后必须将料槽盖板盖好,以免物料浅出料槽,盖为有机玻璃能观察物料的搅拌情况,如搅拌达到效果后,点动倒料按钮进行倒料,当料斗接近机座时即停止,以防止坏机件,倒料完毕后,按下复位按钮,使料槽复合到原来位置。
槽型混合机.jpg
The use of trough mixer is as follows:
1. An empty running test run should be conducted before use. Before test run, the fastening degree of all the connecting parts of the machine, the lubricating oil quantity of the reducer and the integrity of the motor equipment should be checked. Then the main switch of the power supply should be closed for empty running test run. Click the switch and reset button respectively to check whether the work condition is good or not, and then process after meeting the above requirements (the switch and reset button can not be used at the same time).
2. After feeding, the cover plate of the hopper must be covered well so as to avoid shallow discharge of the material from the hopper. The cover is made of plexiglass, which can observe the stirring of the material. If the stirring effect is achieved, the hopper can be poured by clicking the pouring button and stop when the hopper is close to the machine base, so as to prevent the broken parts. After pouring, the reset button is pressed to make the hopper compound to the original material. Come to the position.
联系我们
咨询热线:15995250526

地址:江苏省无锡前洲工业园
销售一部:15861434319
销售座机:0510-83390359
联系人:屠经理
邮 箱:419309846@qq.com